Windows - How to format a USB key from the command prompt



Windows - How to format a USB key from the command prompt Formatting an USB flash drive from the command prompt is really easy. This procedure can be achieved using the format command, which works for most version of Microsoft Windows (Windows 95 up to Windows 8.1).

The procedure is as follows:
  • Connect the USB flash drive to your PC.
  • Click on Start > Run > Type cmd and click on OK.
    • Assuming the letter assigned to the USB flash drive is G, type the following command:
  • format /q /x G: and press Enter.
  • The q parameter stands for quick format
  • The x parameter forces the selected volume to dismount, if needed.
  • NB: Don't forget to replace the letter "G" with your drive letter.

Thanks to jack4rall for this tip.

Comments

Post a Comment

Popular posts from this blog

A VOYAGE Through Rohu in Makira Ulawa Province.

Image
EXCITED MOMENT-HOLIDAY FEVER. It was in the month of December, 2014. The Christmas Holiday break was approaching and everybody working, studying and just Liu Ai ( Unemployed) who reside in Honiara City were all excited as the transport arrangements and the departure date has been confirmed. On the next day (departure date), the sky was cleared and the sun was started to reach the tree tops. Everybody was ready for the voyage. The traffic was busy and the rush hour almost hit the road again as it's Friday afternoon. Later that afternoon, Everybody has ready and started to catch the early Taxi's and buses heading to the west-side where the post areas was. Mv. Airi was the ship to board and it was the last ship to make its passenger run through this route, Marou bay to Haununu Area before the 25th of December. Things have been little crappy for me. I have not got enough for my sea fare. I am so worried during that time as i don't want to spend the X-mass Holiday in Town. I
Read more

How to fix an unrecognized USB drive: we help you find the cause of the problem

Image
It’s never a good thing to see the message “USB Device Not Recognised” after plugging in a hard drive or thumb drive full of your precious files. Here’s how you can try and fix an unrecognized USB drive. By Jim Martin | 25 Apr 14 Share Share Share How to fix an unrecognized USB drive It’s never a good thing to see the message “USB Device Not Recognised” after plugging in a hard drive or thumb drive full of your precious files. But before you give up all hope of ever seeing those files again, there are a few things you can try. Here’s how you can try and fix an unrecognized USB drive. (See also: Recover deleted files for free: recover lost data .) Various problems can cause the error message, from faulty USB ports or software drivers to corrupt partitions or even a dead USB drive. We’ll explain how to figure out what’s gone wrong. How to fix an unrecognized USB drive: try a different USB port or PC The fi
Read more